今天小编要和大家分享的是LT1054,Con相关信息,接下来我将从LT1054-Switched-Capacitor Volt,康妇炎胶囊,桂枝茯苓丸这几个方面来介绍。

LT1054,Con相关技术文章LT1054-Switched-Capacitor Volt康妇炎胶囊,桂枝茯苓丸

LT1054,Con相关技术文章LT1054-Switched-Capacitor Volt

LT1054描述The LT®1054 is a monolithic, bipolar, switched-capacitor voltage converter and regulator. The LT1054 provides higher output current than previously available converters with significantly lower voltage losses. An adaptive switch driver scheme optimizes efficiency over a wide range of output currents. Total voltage loss at 100mA output current is typically 1.1V. This holds true over the full supply voltage range of 3.5V to 15V. Quiescent current is typically 2.5mA.

The LT1054 also provides regulation, a feature not previously available in switched-capacitor voltage converters. By adding an external resistive divider a regulated output can be obtained. This output will be regulated against changes in both input voltage and output current. The LT1054 can also be shut down by grounding the feedback pin. Supply current in shutdown is less than 100µA.

The internal oscillator of the LT1054 runs at a nominal frequency of 25kHz. The oscillator pin can be used to adjust the switching frequency or to externally synchronize the LT1054.

The LT1054 is pin compatible with previous converters such the LTC1044/LTC7660.

LT1054特点Available in Space Saving SO-8 Package Output Current: 100mA (LT1054)125mA (LT1054L) Reference and Error Amplifier for Regulation Low Loss: 1.1V at 100mA Operating Range:3.5V to 15V (LT1054)3.5V to 7V (LT1054L) External Shutdown External Oscillator Synchronization Can Be Paralleled Pin Compatible with the LTC®1044/LTC7660

Typical Application

LT1054典型应用电路  www.elecfans.com

LT1054封装N-8,SO-8

LT1054应用Voltage Inverter Voltage Regulator Negative Voltage Doubler Positive Voltage Doubler

关于LT1054,Con就介绍完了,您有什么想法可以联系小编。

  • UC3846控制芯片工作原理控制图 逆变焊机原理与用途
  • 数字万用表电阻档测试二极管正反向没有阻值(使用万用表测量二极管的正向电阻,为什么各档)
  • 学单片机需要学数电模电吗(学单片机要先学数电模电吗)
  • 电工怎么选择适合自己用的万用表(电工初学者买什么样的万用表好)
  • 单片机需要同时运行多个任务怎么办(单片机怎么同时执行多个任务)
  • 电机保护的方案取决于负载的机械特性
  • 绝缘电阻表正负搭接不复零位是怎么回事
  • 短路怎么用万用表查